EMCS movements (e-AD)
When you send alcohol duty-suspended to another EU country or export it outside the EU, the movement needs an electronic administrative document, the e-AD, in the EMCS system and the 21-character ARC code the Finnish Tax Administration (Vero) gives for it. BrewOS compiles the e-AD's details from the shipment, its picked batches, the products and your company details.
EMCS applies only to shipments to export customers. It is not used for domestic shipments.
Putting EMCS in use
EMCS is put in use per account, because only breweries that export need it. The account owner puts it in use on the Settings > Authorities page: under EMCS e-AD movements press activate, check that EMCS movements in use is ticked and press Save change. You can also ask the AI assistant: "Put EMCS in use on our account."
When EMCS is in use, BrewOS shows:
- an EMCS e-AD section on the shipment page (only on shipments to export customers)
- an EMCS e-AD row in the product settings: the drink's CN heading, the package's CN code and Plato; the EPC is shown
- the products list view EMCS e-AD, where the codes of all products can be seen and edited at once (see Products)
- EMCS excise number and EMCS destination type in the export customer's delivery location form.
Until then, a shipment to an export customer mentions that EMCS is not in use. To take EMCS out of use, clear EMCS movements in use in the same place. The saved details are kept.
Fallback procedure and direct sending
An e-AD is made in one of two ways:
- Fallback procedure (default): BrewOS saves the e-AD's details, you file the declaration yourself in OmaVero and record the ARC code you receive on the shipment.
- Direct sending: BrewOS sends the e-AD to the Tax Administration and the ARC is saved on the shipment. Direct sending is switched on on the Settings > Authorities page with Send e-ADs to the Tax Administration from BrewOS, which is ticked by default when EMCS is put in use. To file e-ADs in OmaVero instead, untick it before saving. It uses the same VeroAPI connection as the excise duty returns, and the company must give BrewOS the Suomi.fi mandate Valmisteveronalaisten tuotteiden siirtojen ilmoittaminen (reporting movements of excise goods). Valmisteveroasioiden hoito, given for excise returns, or the general Veroasioiden hoito is not enough for e-ADs sent through BrewOS).
With direct sending, a shipment to an EU customer cannot be marked as delivered before its e-AD has an ARC code. In the fallback procedure the shipment is not blocked, but it is still worth recording the ARC code.
Before the first e-AD
The shipment page's EMCS e-AD section shows under e-AD details which of these are set and what is missing, with a link to the page where it is fixed. Preview e-AD and sending become available only when everything is in order.
- Consignor's excise number, 13 characters (e.g. FI00000000000): the Settings > Authorities page, section EMCS e-AD movements. Always needed.
- Company street address, postal code and post office: Company details. Always needed.
- Dispatch warehouse's Tax Administration warehouse number, 13 characters starting with FI (e.g. FIYW000013896): the warehouse settings field Tax Administration. Always needed. The number belongs to the tax warehouse and must be on the consignor's warehousekeeper permit. It is not the consignor's excise number.
- Product CN code (e.g. 22030001): the products list view EMCS e-AD or the product settings, row EMCS e-AD. Always needed. The drink's CN heading is chosen from a list: beer, cider or mead and other fermented beverages (sparkling or still) or vermouth. For wine and spirits choose Other CN code and type the full code. The heading applies to all the drink's packages. For beer, still cider and mead and vermouth BrewOS sets the last digits from each package's type and size, because the tariff nomenclature tells them apart: beer in bottles up to 10 l 22030001, in other containers (cans, small kegs) up to 10 l 22030009 and in containers over 10 litres 22030010. A package counts as a bottle when its container type contains the word pullo (or bottle, flaska). The products list view EMCS e-AD shows the code of each package. If the derivation is wrong, choose the right code under This package's CN code; Automatic restores the derivation.
- Product EPC, the excise product code (e.g. B000 beer): the products list view EMCS e-AD; an empty one is derived from the alcohol tax product group. Always needed.
- Degree Plato of beer: Product settings. Needed when the destination country is Austria, Belgium, Bulgaria, Czechia, Germany, Greece, Spain, Italy, Luxembourg, Malta, Poland, Portugal or Romania.
- Delivery location's country: Export customer's delivery location. Always needed.
- Invoice number: the shipment's approved invoice, or the number the shipment was marked invoiced with elsewhere. Always needed: the Tax Administration requires an invoice number on the e-AD, and the invoice date comes from the same invoice.
- Suomi.fi mandate for EMCS movements (direct sending only): the company must give BrewOS the mandate Valmisteveronalaisten tuotteiden siirtojen ilmoittaminen. BrewOS reads it from the last authorisation check; if the mandate was given after that, press Settings > Authorities > Check authorisation.
- Consignee's EMCS excise number (SEED number): Export customer's delivery location. Needed for EU movements to a tax warehouse or a registered consignee. The number is shown in the shipment page's EMCS e-AD section, which warns when it is missing, is not 13 characters or is of another country than the delivery location.
For your own small brewery beer, BrewOS adds the small producer declaration and the previous year's production in hectolitres to the e-AD from the small brewery discount details.
Transport details
The e-AD also says how the goods travel. Enter the transport details under Transport in the EMCS e-AD section of the shipment page and press Save transport details. They are also saved when you press Preview e-AD, Save e-AD or Send e-AD to the Tax Administration.
- Transport arranged by: Consignor (our company), Consignee, Owner of goods or Other. When the owner of goods or another party arranges it, also give the name and address under Transport arranger.
- Mode of transport: for example Road transport or Postal consignment. If you choose Other, describe it in the complementary information.
- Journey time in days or hours (at most 24 hours). The longest allowed time depends on the mode: road and rail 35 days, sea and other 45 days, postal consignment 30 days and air 20 days.
- Dispatch time: when the goods leave, at most 7 days ahead. Empty means the moment the e-AD is sent. If a time given for today has already passed when the e-AD is sent to Vero, the dispatch time becomes the moment it is sent.
- Transport units: vehicle, trailer, tractor, container or fixed transport installation, with its registration or container number. The number is needed for all but a fixed transport installation. Add a trailer or another unit on the row – add unit –. The seal identification is optional.
- We transport it ourselves: your company is the first transporter. Clear it and give the carrier's name, VAT number and address when a carrier takes the goods. A transporter is always needed when someone other than the consignor arranges the transport.
For a new shipment BrewOS suggests the account's previous e-AD's transport details without the dispatch time, or the first time the defaults: the consignor arranges, road transport, vehicle, 1 day and your company as transporter. The Transport row of the e-AD details list says where the details come from and what is missing. Check them and save before sending. The transport details of an e-AD filed with Vero can no longer be changed in BrewOS.
An e-AD for a shipment
The e-AD is made after picking and before the goods leave, because BrewOS compiles its product rows from the picked batches.
- Make a shipment to an export customer and choose a delivery location with the right country and, where needed, the consignee's excise number.
- Lock and pick the whole shipment from one tax warehouse that has a Tax Administration warehouse number. Until then the EMCS e-AD section says: The e-AD is made from the picked products: pick the whole shipment first.
- Check the Destination type. It comes from the delivery location: choose the EMCS destination type in the delivery location's details (link change in the delivery location's details). The choice applies to all later e-ADs to the delivery location. An EU movement needs it: EU: tax warehouse or EU: registered consignee, as the consignee is registered in SEED. Both have an excise number, so BrewOS does not derive the role, and the Tax Administration refuses the e-AD if the role does not match. Without a choice, a destination outside the EU is export.
- Fill in Transport (see Transport details above) and press Save transport details.
- Check that every row under e-AD details is green and press Preview e-AD. BrewOS shows the details it compiles. The preview saves nothing.
- Make the e-AD:
- In the fallback procedure, press Save e-AD, file the declaration in OmaVero with the details from the preview, enter the ARC code you receive from OmaVero in the field ARC from OmaVero (21 characters) and press Save ARC.
- With direct sending, press Send e-AD to the Tax Administration and confirm. The ARC code is saved on the shipment. Fetch status from the Tax Administration shows Vero's details of the e-AD.
- Mark the shipment as delivered.
- Once the consignee has acknowledged the goods in EMCS, press Mark as received.
What can be done when
BrewOS shows in the EMCS e-AD section only the buttons that the shipment's state allows. The same rules apply to the AI assistant.
- Save e-AD / Send e-AD to the Tax Administration – Allowed: the shipment is fully picked or delivered. Refused: the shipment is cancelled or not picked, or it already has an e-AD filed with the Tax Administration.
- Save ARC – Allowed: the shipment is picked or delivered. Refused: the shipment already has an e-AD filed with the Tax Administration, whose ARC code is not replaced.
- Mark as received – Allowed: the shipment is delivered and the e-AD has an ARC code. Refused: the e-AD has no ARC code, is already received or is cancelled.
- Cancel e-AD – Allowed: before the goods have left. Refused: the shipment is delivered, or the e-AD is in transit, received, rejected or already cancelled.
An e-AD filed with the Tax Administration means the states sent, accepted (ARC), in transit, destination changed and received. A cancelled or rejected e-AD does not prevent a new one.
When cancelling, choose a reason: Other reason, Typing error in the accompanying document, Commercial transaction interrupted, The accompanying document is a duplicate or The movement did not begin on the dispatch date. With Other reason, also write an explanation. With direct sending, the cancellation is also sent to the Tax Administration.
EMCS with the AI assistant
You can tell the AI assistant in your own words what you want to do. It asks for confirmation before it sends or cancels an e-AD or switches direct sending on. Examples:
- "Is EMCS in use on our account?"
- "Set the IPA's CN code to 22030001 and its degree Plato to 15."
- "Add the excise number SE... to the Stockholm delivery location."
- "Shipment 43024 goes with the carrier Rahti Oy, truck ABC-123 and trailer XYZ-45, arriving in 2 days."
- "Make the e-AD for shipment 43024."
- "The ARC of shipment 43024 is 26FI..."
- "Stockholm acknowledged shipment 43024."
- "Cancel the e-AD of shipment 43024, the deal fell through."
Error messages
- The EMCS e-AD requires a CN code for product ... – Set the CN code in the products list view EMCS e-AD.
- The EMCS e-AD requires an excise product code (EPC) for product ... – Set the EPC or the alcohol tax product group for the product.
- The EMCS e-AD requires degrees Plato for product ... – Set the product's degree Plato.
- The EMCS e-AD requires the EU consignee's excise number – Add the EMCS excise number to the delivery location, or choose export as the delivery location's EMCS destination type if the goods leave the EU.
- The consignee's excise number ... is from a different country than the delivery location – The Tax Administration takes the destination member state from the first two letters of the consignee's excise number (e.g. DE, Greece EL). Correct the delivery location's country or its EMCS excise number so that they match.
- Consignor's excise number ... is not valid for EMCS – Set a 13-character number on the Settings > Authorities page.
- The EMCS e-AD requires from the company's address details: ... – Complete the company details.
- An EMCS movement requires a foreign destination country – Check the delivery location's country.
- The EMCS e-AD requires the dispatch warehouse's Tax Administration warehouse number – The products were picked from a warehouse without a warehouse number. Add the number to the warehouse settings if the warehouse is a tax warehouse, or undo the picking and pick the products from a tax warehouse.
- Warehouse ... number ... is not valid for EMCS – Correct the warehouse settings field Tax Administration: 13 characters, starting with FI.
- The goods of an e-AD leave from one tax warehouse – Undo the picking and pick all products from the same warehouse.
- The e-AD is made from the picked products: pick the whole shipment first – Finish picking the shipment and try again.
- The shipment already has an e-AD filed with the Tax Administration – Cancel the old e-AD first if you need a new one.
- Transport details of the EMCS e-AD: ... – Complete Transport, for example the vehicle's registration number, the transporter's address or a dispatch time that has passed, and save.
- The transport details of an e-AD filed with the Tax Administration cannot be changed here – Cancel the e-AD and make a new one, or make the change in OmaVero as a change of destination.
- Invalid ARC – Check the ARC code in OmaVero: 21 characters, e.g. 26FIA1B2C3D4E5F6G7H81.
- A delivered movement can no longer be cancelled – The goods have left; corrections are made in OmaVero.
- Tax Administration EMCS returned HTTP ... – Read Vero's error text. Error 1040 means the Suomi.fi authorisation is missing: check that the company has given BrewOS the mandate Valmisteveronalaisten tuotteiden siirtojen ilmoittaminen (see Suomi.fi authorisation for VeroAPI).
Limitations
- Some of the e-AD's details are derived or defaults. The kind of package comes from the container type (bottle BO, can CX, keg or container over 10 litres KG, multipack carton CT) and the number from the picked units. Net mass is the drink (1 kg per litre) and gross mass adds an estimate for the containers (glass bottle 0.6 kg per litre, can about 15 g, keg 0.3 kg per litre, i.e. a steel keg). The export customs office is FI999800. Check them in OmaVero before filing.
- Vero's notifications are not fetched into BrewOS: receipt acknowledgements and rejections do not update by themselves. Mark the receipt by hand.
- Cancelling a shipment does not cancel its e-AD. Cancel the e-AD separately before cancelling the shipment.
- A change of destination cannot be made in BrewOS; make it in OmaVero.